Skip to content

Calculators

Profile › Calculators has free calculators in four groups: Body, Energy, Strength and Cardio. They use the same formulas as the rest of the app, so they also show where the app’s numbers come from. On your profile’s daily target, How Is This Calculated? opens the matching calculator with your numbers already in it.

  • Every calculator starts from your profile and latest measurements. You can change any field.
  • A note under the result says how to read it.
  • How It’s Calculated shows each formula in words, then again with your numbers.
  • Sources says where each formula comes from.
  • Use My Profile puts your numbers back. Clear All empties the fields.
  • A field the formula can’t use says why under it (too high, too low), and the result asks you to check the values. Fields marked Optional can stay empty.

These are estimates from published formulas, not medical advice. Below, weight is in kg, height and other body measurements in cm, and age in years.

Your weight compared with your height.

BMI=weight(height/100)2\text{BMI} = \frac{\text{weight}}{(\text{height} / 100)^2}

The WHO adult categories are: underweight under 18.5, normal from 18.5 to 25, overweight from 25 to 30, and obese from 30. BMI can’t tell muscle from fat.

Source: World Health Organization, BMI classification for adults.

The weights that give a normal BMI at your height.

18.5×(height/100)2  to  25×(height/100)218.5 \times (\text{height} / 100)^2 \;\text{to}\; 25 \times (\text{height} / 100)^2 Source: World Health Organization, BMI classification for adults.

What you weigh without your fat, and the fat itself.

lean mass=weight×(1−body fat %100)fat mass=weight−lean mass\text{lean mass} = \text{weight} \times \left(1 - \frac{\text{body fat \%}}{100}\right) \qquad \text{fat mass} = \text{weight} - \text{lean mass}

A BMI that counts only muscle and everything else that isn’t fat. The second number adjusts it to a height of 1.80 m, so people of different heights can compare.

FFMI=lean mass(height/100)2FFMI1.80=FFMI+6.1×(1.8−height100)\text{FFMI} = \frac{\text{lean mass}}{(\text{height} / 100)^2} \qquad \text{FFMI}_{1.80} = \text{FFMI} + 6.1 \times \left(1.8 - \frac{\text{height}}{100}\right) Source: Kouri EM, Pope HG, Katz DL, Oliva P (1995). Clin J Sport Med 5(4):223–228.

How much of your weight you carry around your waist.

waistheightwaisthips\frac{\text{waist}}{\text{height}} \qquad \frac{\text{waist}}{\text{hips}}
  • Waist to height: under 0.5 is healthy, 0.5 to 0.6 is raised, and 0.6 or more is high.
  • Waist to hip: shown only when you fill in your hips and gender. It is compared with the WHO limits: 0.90 for men, 0.85 for women.
Sources: Ashwell M, Gunn P, Gibson S (2012). Obes Rev 13(3):275–286. World Health Organization (2008). Waist circumference and waist–hip ratio.

Your body fat percentage, from a tape measure.

men: 4951.0324−0.19077log⁡10(waist−neck)+0.15456log⁡10(height)−450\text{men: } \frac{495}{1.0324 - 0.19077 \log_{10}(\text{waist} - \text{neck}) + 0.15456 \log_{10}(\text{height})} - 450 women: 4951.29579−0.35004log⁡10(waist+hips−neck)+0.221log⁡10(height)−450\text{women: } \frac{495}{1.29579 - 0.35004 \log_{10}(\text{waist} + \text{hips} - \text{neck}) + 0.221 \log_{10}(\text{height})} - 450 Source: Hodgdon JA, Beckett MB (1984). Naval Health Research Center, reports 84-11 and 84-29.

The energy your body burns at complete rest. It uses the formula chosen in your profile.

FormulaMenWomen
Mifflin-St Jeor10W+6.25H−5A+510W + 6.25H - 5A + 510W+6.25H−5A−16110W + 6.25H - 5A - 161
Harris-Benedict66.5+13.75W+5.003H−6.75A66.5 + 13.75W + 5.003H - 6.75A655.1+9.563W+1.85H−4.676A655.1 + 9.563W + 1.85H - 4.676A
Revised Harris-Benedict88.362+13.397W+4.799H−5.677A88.362 + 13.397W + 4.799H - 5.677A447.593+9.247W+3.098H−4.33A447.593 + 9.247W + 3.098H - 4.33A
Katch-McArdle370+21.6 L370 + 21.6\,Lsame
Cunningham500+22 L500 + 22\,Lsame

WW is weight, HH height, AA age and LL lean mass.

Sources: Mifflin MD, St Jeor ST et al. (1990). Am J Clin Nutr 51(2):241–247. Harris JA, Benedict FG (1919). Carnegie Institution of Washington. Roza AM, Shizgal HM (1984). Am J Clin Nutr 40(1):168–182. McArdle WD, Katch FI, Katch VL. Exercise Physiology. Cunningham JJ (1980). Am J Clin Nutr 33(11):2372–2374.

The calories to eat each day. First your total daily energy expenditure (TDEE), then your weekly goal on top.

TDEE=BMR×activity factortarget=TDEE+weekly goal×77007\text{TDEE} = \text{BMR} \times \text{activity factor} \qquad \text{target} = \text{TDEE} + \frac{\text{weekly goal} \times 7700}{7}
  • Activity factor: from 1.2 (sedentary) to 1.9 (extra active).
  • 7,700 kcal: the energy in one kg of body mass.
Source: Wishnofsky M (1958). Am J Clin Nutr 6(5):542–546.

How your daily target splits into protein, fat and carbohydrates.

protein=weight×g per kgfat=target×fat share9carbs=target−4×protein−9×fat4\text{protein} = \text{weight} \times \text{g per kg} \qquad \text{fat} = \frac{\text{target} \times \text{fat share}}{9} \qquad \text{carbs} = \frac{\text{target} - 4 \times \text{protein} - 9 \times \text{fat}}{4}
  • Protein: 1.9 g per kg by default. More when you’re losing weight, over 50, or lean.
  • Fat: 30 % of the target by default. Less when you’re losing weight or training hard.
Source: Atwater factors: 4 kcal/g of protein and carbohydrate, 9 kcal/g of fat.

How many weeks your weekly goal takes to reach a goal weight. It also shows the date you’d get there and the daily calories it means.

weeks=goal weight−weightweekly goalcalories a day=weekly goal×77007\text{weeks} = \frac{\text{goal weight} - \text{weight}}{\text{weekly goal}} \qquad \text{calories a day} = \frac{\text{weekly goal} \times 7700}{7}

If your weekly goal moves you away from the goal weight, or is set to Maintain, the calculator says so.

How much water to have each day. Food gives you about a fifth of it, so you drink the rest.

drinks=total water×80 %\text{drinks} = \text{total water} \times 80\,\%

The total is 2.5 L a day for men and 2.0 L for women. Drink more in hot weather and when you sweat.

Source: EFSA (2010). Dietary Reference Values for water. EFSA Journal 8(3):1459.

The heaviest weight you could lift once, estimated from a set you did.

1RM=load×(1+reps30)\text{1RM} = \text{load} \times \left(1 + \frac{\text{reps}}{30}\right)

Works for sets of 1 to 12 reps, the same range as your records.

Source: Epley B (1985). Poundage Chart.

The weight to use for 1 to 12 reps. It’s the same formula as the 1RM, worked backwards.

load=1RM1+reps/30rounded=round ⁣(loadincrement)×increment\text{load} = \frac{\text{1RM}}{1 + \text{reps} / 30} \qquad \text{rounded} = \text{round}\!\left(\frac{\text{load}}{\text{increment}}\right) \times \text{increment}

The increment is the smallest step you can add to the bar: 2.5 kg to start.

Powerlifting scores, so lifters of different body weights can compare. Your total is your best squat, bench press and deadlift added together.

score=total×500f(weight)\text{score} = \frac{\text{total} \times 500}{f(\text{weight})}

ff is a polynomial of body weight, different for men and women. DOTS has been the IPF’s formula since 2019. Wilks is the one it used before.

Sources: International Powerlifting Federation (2019), DOTS. Wilks R (1994).

Fill in any two of the three to get the third, plus your speed.

pace=timedistancespeed=distancetime\text{pace} = \frac{\text{time}}{\text{distance}} \qquad \text{speed} = \frac{\text{distance}}{\text{time}}

If you fill in all three, the calculator works out the one you changed longest ago. It shows that field grayed out.

From one run, the time and pace you could expect over 5 km, 10 km, a half marathon and a marathon.

time=your time×(distanceyour distance)1.06\text{time} = \text{your time} \times \left(\frac{\text{distance}}{\text{your distance}}\right)^{1.06}

It’s most accurate near the distance you ran.

Source: Riegel PS (1981). Am Sci 69(3):285–290.

The time each 100 m takes.

pace=timedistance×100 m\text{pace} = \frac{\text{time}}{\text{distance}} \times 100\ \text{m}

Five training zones, each a share of your heart-rate reserve: the gap between your resting and maximum heart rate.

zone=resting+zone %×(max−resting)\text{zone} = \text{resting} + \text{zone \%} \times (\text{max} - \text{resting})

The five zones are 50–60 %, 60–70 %, 70–80 %, 80–90 % and 90–100 %. Leave the maximum empty to estimate it from your age:

max=208−0.7×age\text{max} = 208 - 0.7 \times \text{age} Sources: Karvonen MJ, Kentala E, Mustala O (1957). Ann Med Exp Biol Fenn 35(3):307–315. Tanaka H, Monahan KD, Seals DR (2001). J Am Coll Cardiol 37(1):153–156.

The most oxygen your body can use, in ml per kg per minute. It’s the usual measure of aerobic fitness. Use either test, or both:

12-minute run: distance−504.944.73heart rate: 15.3×maxresting\text{12-minute run: } \frac{\text{distance} - 504.9}{44.73} \qquad \text{heart rate: } 15.3 \times \frac{\text{max}}{\text{resting}}

For the first test, run as far as you can in 12 minutes. Leave the maximum heart rate empty to estimate it from your age.

Sources: Cooper KH (1968). JAMA 203(3):201–204. Uth N et al. (2004). Eur J Appl Physiol 91(1):111–115.

The energy an activity burns. One MET is about 1 kcal per kg of body weight per hour.

kcal=MET×weight×hours\text{kcal} = \text{MET} \times \text{weight} \times \text{hours}

Pick one of 16 activities to use its published MET, or type your own.

Source: Ainsworth BE et al. (2011). Compendium of Physical Activities. Med Sci Sports Exerc 43(8):1575–1581.